Wp 29 1958 Agreement

16 oktober 2021

Mutual recognition of approvals under the 1958 Agreement is intended to facilitate international trade in vehicles and their components. When a component is approved by one of the Contracting Parties to the 1958 Convention in accordance with a UN Regulation, all other Contracting Parties which have signed the same Regulation shall recognize that approval. This avoids repeated testing and approval of components in the different countries to which they are exported. This reduces the time and cost required for the design, production and homologation as well as the commissioning of vehicles and their components. (continued: www.unece.org/trans/main/wp29/wp29wgs/wp29gen/wp29pub.html) Before granting type-approval under a regulation annexed to the 1958 Agreement, the type-approval authority of a Contracting Party shall carry out an initial assessment of the manufacturer`s production facility, i.e.: verify the availability of satisfactory arrangements and procedures (e.B ISO 9002) to ensure effective control to ensure that vehicles, equipment or parts, when in production, shall conform to the approved type. The type-approval authority shall verify the existence of appropriate provisions and documented control plans in order to carry out, at certain intervals, related tests or controls necessary to verify subsequent conformity with the approved type, including, where appropriate, the specific conformity to production (COP) tests provided for in the applicable Regulation. The type-approval authority which granted the type-approval may at any time verify the conformity control methods used in each production. Ease. The normal frequency of such examinations and the COP test procedure shall be in accordance with the rules set out in Appendix 2 to the 1958 Convention or with the COP provisions of the applicable Regulations annexed to the Convention. More detailed information on the COP procedure is available in Appendix 2 to the 1958 Convention or in the specific provisions on conformity of production under the current Regulation at www.unece.org/trans/main/wp29/wp29regs.html. The Compendium of Applicants and Global Technical Regulations lists all national or regional regulations that are subject to the applicant for harmonization and adoption as a UN gtr.

Any Contracting Party to the 1998 Convention may request the Executive Committee to include, apply or adopt for future application all technical regulations applied, applied or adopted by the Party in the Compendium of Candidates. In accordance with Article 6.2 of the Agreement, all United Nations Regulations annexed to the 1958 Agreement are candidates for harmonization and adoption as United Nations gtrs in addition to those listed in the Compendium of Candidates. For more information, see Article 5 of the 1998 Agreement.The Compendium of Candidates is available at:www.unece.org/trans/main/wp29/wp29wgs/wp29gen/wp29glob_candidate. Information on the administrative services (which issue approvals) and the technical services assigned to them (which carry out the tests and issue the test reports) can be found in status document TRANS/WP.29/343 of the 1958 Agreement. This document lists, for each Regulation, the Contracting Parties that have signed the Regulation and contains the codes of their administrative divisions and technical services designated by each Party. The full addresses of the Administrative Department and Technical Services corresponding to the above address codes can be found in Annex 1 of status document TRANS/WP.29/343.The multilingual status document is available on the WP.29 website at (please note that this document is extensive and comprises about 300 pages): www.unece.org/trans/main/wp29/wp29wgs/wp29gen/wp29fdocstts.html The country may comply with the 1958 Agreement in accordance with the provisions of Join the article. 6 of the Agreement by depositing an instrument of accession with the Secretary-General of the EEC – […].

Stöd Rengsjö Framtid

Bankgiro 253-8445